GOLETA, Calif.--(BUSINESS WIRE)--
Resonant Inc. (NASDAQ: RESN), a designer of filters for radio frequency (RF) front-ends for the mobile device industry, will host a virtual roadshow webinar on Thursday, June 22, 2017 at 1:30 p.m. Pacific time (4:30 p.m. Eastern time ).
George Holmes, CEO, and Jeff Killian, CFO, will host the call followed by a question and answer session. Management will be presenting an overview of the business model, growth initiatives, key milestones and a corporate update. The call will be accompanied by a presentation which can be accessed via the webcast link below.
To access the call, please use the following information:
Date: Thursday, June 22, 2017
Time: 1:30 p.m. Pacific time (4:30
p.m. Eastern time )
Dial-in: 1-877-407-3982
International
Dial-in: 1-201-493-6780
Webcast: http://public.viavid.com/index.php?id=124994
A telephone replay will be available approximately two hours after the call and will run through July 22, 2017 by dialing 1-844-512-2921 from the U.S., or 1-412-317-6671 from international locations, and entering replay pin number: 13664694.
About Resonant Inc.
Resonant is creating software tools and
IP & licensable blocks that enable the development of innovative filter
designs for the RF front-end, or RFFE, for the mobile device industry.
The RFFE is the circuitry in a mobile device responsible for the radio
frequency signal processing and is located between the device’s antenna
and its digital baseband. Filters are a critical component of the RFFE
that selects the desired radio frequency signals and rejects unwanted
signals and noise. For more information, please visit www.resonant.com.
About Resonant’s ISN® Technology
Resonant can create designs
for difficult bands and complex requirements that we believe have the
potential to be manufactured for half the cost and developed in half the
time of traditional approaches. The Company’s large suite of proprietary
mathematical methods, software design tools and network synthesis
techniques enable it to explore a much bigger set of possible solutions
and quickly derive the better ones. These improved filters still use
existing manufacturing methods (i.e. surface acoustic wave (SAW) and/or
temperature compensated surface acoustic wave (TC-SAW)) and can perform
as well as those using higher cost methods (i.e. BAW or FBAR). While
most of the industry designs filters using a coupling-of-modes model,
Resonant uses circuit models and physical models. Circuit models are
computationally much faster, and physical models are highly accurate
models based entirely on fundamental material properties and dimensions.
Resonant’s method delivers excellent predictability, enabling
achievement of the desired product performance in roughly half as many
turns through the fab. In addition, because Resonant’s models are
fundamental, integration with its foundry and fab customers is eased
because its models speak the “fab language” of basic material properties
and dimensions.
Safe Harbor/ Forward-Looking Statements
This press release
contains forward-looking statements, which include the following
subjects, among others: the capabilities of expected growth in demand
for our designs and technologies. Forward-looking statements are made as
of the date of this document and are inherently subject to risks and
uncertainties which could cause actual results to differ materially from
those in the forward-looking statements, including, without limitation,
the following: our limited operating history; our ability to complete
designs that meet customer specifications; the ability of our customers
(or their manufacturers) to fabricate our designs in commercial
quantities; the ability of our designs to significantly lower costs
compared to other designs and solutions; the risk that the intense
competition and rapid technological change in our industry renders our
designs less useful or obsolete; our ability to find, recruit and retain
the highly skilled personnel required for our design process in
sufficient numbers to support our growth; our ability to manage growth;
our ability to invest resources in IP protection and enforcement; and
general market, economic and business conditions. Additional factors
that could cause actual results to differ materially from those
anticipated by our forward-looking statements are under the captions
“Risk Factors” and “Management’s Discussion and Analysis of Financial
Condition and Results of Operations” in our most recent Annual Report
(Form 10-K) or Quarterly Report (Form 10-Q) filed with the Securities
and Exchange Commission. Forward-looking statements are made as of the
date of this release, and we expressly disclaim any obligation or
undertaking to update forward-looking statements.
View source version on businesswire.com: http://www.businesswire.com/news/home/20170616005122/en/
