6963 Rohm Co. Ltd.

ROHM Develops an Ultra-Compact CMOS Op Amp Featuring Industry-Leading* Ultra-Low Circuit Current

ROHM Develops an Ultra-Compact CMOS Op Amp Featuring Industry-Leading* Ultra-Low Circuit Current

Santa Clara, CA and Kyoto, Japan, Sept. 09, 2025 (GLOBE NEWSWIRE) -- today announced the development of the , an ultra-compact CMOS operational amplifier (op amp) that achieves the industry’s lowest operating circuit current. Optimized for use as a sensing amplifier, this IC is ideally suited for space-constrained applications such as handheld measurement instruments, wearable devices, and indoor motion detectors.

As the demand continues to grow for more sophisticated control in battery-driven devices, the importance of sensors that detect parameters such as temperature, humidity, vibration, pressure, and flow rate – along with the op amps used to amplify these sensor signals – continues to rise. At the same time, greater miniaturization and energy savings in applications is a necessary step to realizing a sustainable society –placing similar demands on individual devices as well.

In response to these evolving market needs, ROHM has advanced its process, packaging, and proprietary Nano Energy™ circuit technologies to develop an op amp that addresses three key requirements: lower power consumption, higher accuracy, and compact size. The newly developed achieves an ultra-compact footprint of less than 1mm2 by adopting a WLCSP (Wafer Level Chip Scale Package) with a fine ball pitch of 0.35mm while delivering an industry-leading low operating current of 160nA (typ.). This not only contributes to high-density mounting in space-constrained applications, but also to significantly extending battery life.

Moreover, the TLR1901GXZ features an exceptionally low input offset voltage of just 0.55mV (max.), ranking among the best in ultra-low current op amps – approx. 45% lower than typical products on the market. A maximum input offset voltage temperature drift of 7uV/°C further ensures high-accuracy performance across the operating temperature range.

Design flexibility can be enhanced by pairing the op amp with ROHM’s ultra-compact general-purpose resistors, such as the and , for functions like gain adjustment. The MCR004 series includes the , a fully lead-free, environmentally friendly option that support sustainable designs.  Adapter boards featuring SSOP5 package ICs are offered as well to facilitate initial evaluation and replacement considerations.

Going forward, ROHM will continue to pursue further power savings in op amps by advancing both miniaturization and original ultra-low power technologies. At the same time, we are committed to improving device performance by reducing noise and offset, expanding power supply voltage ranges, and contributing to solving social issues through more precise application control.

Application Examples

• Consumer devices: wearables, smart devices, motion sensors, etc.

• Industrial equipment: gas detectors, fire alarms, handheld measurement instruments loggers, environmental sensors for IoT, etc.

Online Sales Information

Launch Date:  Now

Online Distributors: and

• Applicable Part No:

• IC-Mounted Adapter Board:

Note: DigiKey™ and Mouser™ are trademarks or registered trademarks of their respective companies.

What is Nano Energy Technology?

Nano Energy refers to proprietary ultra-low current consumption technology that achieves current consumption on the order of nano ampere (nA) by combining advanced analog technologies covering circuit design, layout, and processes utilizing ROHM’s vertically integrated production system.This contributes not only to extending the operating time of battery-powered IoT and mobile devices, but also improved efficiency in industrial and automotive equipment where increased power consumption is problematic.

Nano Energy™ is a trademark or registered trademark of ROHM Co., Ltd.

____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

* ROHM study, September 2025

Attachments



Heike Mueller
ROHM Semiconductor
 
 
EN
09/09/2025

Underlying

To request access to management, click here to engage with our
partner Phoenix-IR's CorporateAccessNetwork.com

Reports on Rohm Co. Ltd.

 PRESS RELEASE

ROHM Develops New Smart Switches Optimized for Zonal Controllers

ROHM Develops New Smart Switches Optimized for Zonal Controllers Accelerates automotive electrification through high-capacitance load driving capability Santa Clara, CA and Kyoto, Japan, Sept. 30, 2025 (GLOBE NEWSWIRE) -- today announced the release of six new high-side smart switches (IPDs: Intelligent Power Devices)  featuring highly accurate current sensing and low ON resistances ranging from 9mΩ to 180mΩ. These devices are designed to protect loads and subsystems from abnormalities such as overcurrent, overvoltage, and overtemperature, ensuring reliable operation and safeguarding s...

Pelham Smithers
  • Pelham Smithers

PSA Strategy: Japan Stock Market Quarterly for 2025 Q4

For almost three years the Nikkei 225 has been tracking its performance from the 2003~5 bull market, albeit at levels some 3.3x higher In this report, Pelham Smithers discusses the similarities and asks three key questions: (1) Can we continue to track 2005 through the rest of the year; (2) Whatever happens in Q4, should we fear or be hopeful for 2026? And (3) Who are the upcoming winners and losers.

 PRESS RELEASE

ROHM Releases DOT-247: Integrated 2-in-1 SiC Molded Module for Industr...

ROHM Releases DOT-247: Integrated 2-in-1 SiC Molded Module for Industrial Applications Santa Clara, CA and Kyoto, Japan, Sept. 16, 2025 (GLOBE NEWSWIRE) -- today announced the development of the DOT-247, a new 2-in-1 SiC molded module (, ) designed for industrial applications such as PV inverters, UPS systems, and semiconductor relays. This innovative module combines the proven versatility of the widely adopted TO-247 package with enhanced design flexibility and superior power density. The DOT-247’s unique dual TO-247 structure enables the integration of larger chips that were previous...

 PRESS RELEASE

ROHM Develops an Ultra-Compact CMOS Op Amp Featuring Industry-Leading*...

ROHM Develops an Ultra-Compact CMOS Op Amp Featuring Industry-Leading* Ultra-Low Circuit Current Santa Clara, CA and Kyoto, Japan, Sept. 09, 2025 (GLOBE NEWSWIRE) -- today announced the development of the , an ultra-compact CMOS operational amplifier (op amp) that achieves the industry’s lowest operating circuit current. Optimized for use as a sensing amplifier, this IC is ideally suited for space-constrained applications such as handheld measurement instruments, wearable devices, and indoor motion detectors. As the demand continues to grow for more sophisticated control in battery-dri...

 PRESS RELEASE

ROHM’s SiC MOSFETs Adopted in Schaeffler’s New Inverter Brick – Now in...

ROHM’s SiC MOSFETs Adopted in Schaeffler’s New Inverter Brick – Now in Mass Production Santa Clara, CA and Kyoto, Japan, Sept. 04, 2025 (GLOBE NEWSWIRE) -- and leading German automotive supplier Schaeffler today have announced the start of mass production for a new high-voltage inverter brick equipped with ROHM’s SiC (silicon carbide) MOSFET bare chips. Developed under a strategic partnership, the inverter brick is slated for use by a major Chinese automaker. The Schaeffler inverter subassembly is the essential power device building block (brick) to control the electric drive via logi...

ResearchPool Subscriptions

Get the most out of your insights

Get in touch