reports
3D Systems Achieves Full-Scope EU MDR Certification, Accelerating Euro...
3D Systems Achieves Full-Scope EU MDR Certification, Accelerating European Launch of NextDent® Jetted Denture Solution Targeted for Summer 2026 Certification Marks Major Milestone in Strategic Dental Growth Initiative Addressing Straightening, Protection, Repair and Replacement of Teeth ROCK HILL, S.C., March 25, 2026 (GLOBE NEWSWIRE) -- 3D Systems (NYSE: DDD) today announced it has received full-scope certification under the European Union Medical Device Regulation (EU MDR) 2017/745. The certification was attained on Monday, March 17, 2026. This milestone confirms that the Company’s q...
3D Systems Appoints Phyllis Nordstrom as Chief Financial Officer
3D Systems Appoints Phyllis Nordstrom as Chief Financial Officer ROCK HILL, S.C., March 23, 2026 (GLOBE NEWSWIRE) -- 3D Systems (NYSE: DDD) today announced the appointment of Phyllis Nordstrom as Executive Vice President and Chief Financial Officer, effective March 23, 2026. Ms. Nordstrom, who has served as Interim Chief Financial Officer since August 2025, will also continue in her role as Chief Administrative Officer, reporting directly to President and CEO Dr. Jeffrey Graves. Ms. Nordstrom's promotion reflects the company's strong confidence in her leadership and commitment to financi...
3D Systems Reports Fourth Quarter and Full Year 2025 Financial Results
3D Systems Reports Fourth Quarter and Full Year 2025 Financial Results ROCK HILL, S.C., March 09, 2026 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the fourth quarter and full year ended December 31, 2025. Fourth quarter revenue of $106.3 million grew 16% sequentially, above guidance of 8% to 10% growth, driven by a successful ramp-up of new printer system sales and higher materials consumptionFor full year 2025, the Company delivered double-digit top-line growth in personalized health services and aerospace and defense marketsCost reduc...
3D Systems Announces Date of Fourth Quarter and Full Year 2025 Financi...
3D Systems Announces Date of Fourth Quarter and Full Year 2025 Financial Results ROCK HILL, S.C., March 02, 2026 (GLOBE NEWSWIRE) -- (NYSE:DDD) announced today it will release its financial results for the fourth quarter and full year 2025 before the U.S. stock market opens on Monday, March 9, 2026. The company will hold a conference call and simultaneous webcast to discuss these financial results on Monday, March 9, 2026 at 8:30 a.m. Eastern Time. Fourth Quarter and Full Year 2025 Financial Results Conference CallDate: Monday, March 9, 2026Time: 8:30 a.m. Eastern TimeListen via webcast...
3D Systems Expands NextDent® Jetted Denture Solution with Three New Ba...
3D Systems Expands NextDent® Jetted Denture Solution with Three New Base Shades to Enhance Aesthetics, Production Flexibility, and Patient Satisfaction Adds three new denture base shades (DP, LP, RP) to better match diverse natural gum tones and address real patient diversityExpands production flexibility for dental laboratoriesReinforces market leadership in monolithic, multi-material denture printingDelivers up to 300% faster production, over 50% less manual labor, and one-day turnaround (vs. five days traditional) — slashing labor, streamlining workflows, and cutting costs for labs ROCK...
3D Systems to Present at the Needham Growth Conference
3D Systems to Present at the Needham Growth Conference ROCK HILL, S.C., Jan. 05, 2026 (GLOBE NEWSWIRE) -- (NYSE:DDD) today announced that the Company will present via a fireside chat at the following investor conference: Event: 28th Annual Needham Growth ConferenceDate: Tuesday, January 13th, 2026Presentation Time: 12:45 p.m. – 1:25 p.m. Eastern TimePresenter: Dr. Jeff Graves, President and Chief Executive Officer; Phyllis Nordstrom, Interim Chief Financial Officer and Chief Administrative Officer A live webcast, as well as a replay, of the presentation will be available on the investo...
3D Systems Accelerates Growth in Aerospace & Defense with Strategic In...
3D Systems Accelerates Growth in Aerospace & Defense with Strategic Investments and Projected Leadership Position Aerospace & Defense on Track to Become Company's Largest Industrial Business in 2026, Supported by Ongoing Investments and Favorable U.S. Policy Tailwinds ROCK HILL, S.C., Jan. 05, 2026 (GLOBE NEWSWIRE) -- 3D Systems (NYSE: DDD), a leading provider of additive manufacturing solutions, today announced significant momentum in its Aerospace & Defense (A&D) business, including robust revenue growth projections, a major U.S. facility expansion, and key technological advancements....
3D Systems Announces FDA 510(k) Clearance Expanding VSP Orthopedics In...
3D Systems Announces FDA 510(k) Clearance Expanding VSP Orthopedics Indications to Include Skeletally Mature Adolescents Removes Key Adoption Barriers in Pediatric/Adolescent Oncology and Deformity Market ROCK HILL, S.C., Dec. 15, 2025 (GLOBE NEWSWIRE) -- 3D Systems (NYSE: DDD) today announced that the U.S. Food and Drug Administration has granted 510(k) clearance expanding the indications for its VSP® Orthopedics virtual surgical planning and patient-specific instrumentation platform to include skeletally mature adolescents of normal bone stature, in addition to adults. Key Investment...
3D Systems Announces $31 Million Equitization Transaction
3D Systems Announces $31 Million Equitization Transaction ROCK HILL, S.C., Dec. 09, 2025 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE: DDD) today announced that it has entered into separate, privately negotiated agreements with a limited number of holders (the “Transaction Participants”) of its existing 0% Convertible Senior Notes due 2026 (the “2026 Notes”) to exchange an aggregate principal amount of $30,773,000 of 2026 Notes for an aggregate of 16,625,243 shares (“Shares”) of 3D Systems’ common stock (the “Exchange”). The Exchange is expected to close on or about December 16, 2025...
3D Systems Transforming Manufacturing with Introduction of Next-genera...
3D Systems Transforming Manufacturing with Introduction of Next-generation Stereolithography Solutions at Formnext 2025 SLA 825 Dual, the Company’s most advanced large-frame Stereolithography printer, delivers next-level productivity and 20% larger build volume for key markets such as Motorsports, Foundries & Service BureausArrayCast™ allows foundries to create customized casting trees 10x more efficiently with 20x reduction in manual laborAntimony-free Accura® SbF delivers fast draining, stable QuickCast® patterns with high modulus, low ash, excellent burnoutAccura Xtreme Black delivers lo...
3D Systems Reports Third Quarter 2025 Financial Results
3D Systems Reports Third Quarter 2025 Financial Results ROCK HILL, S.C., Nov. 04, 2025 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the third quarter ended September 30, 2025. Revenue of $91.2 million driven by sequential growth in hardware printer sales and continued strong growth year-over-year in Medical Technology.Regenerative Medicine revenue declined sequentially, primarily due to the achievement of a program milestone in the prior quarter.Operating expenses continued to decline, reflecting strong progress on the Company’s cost red...
3D Systems Announces Date of Third Quarter 2025 Financial Results
3D Systems Announces Date of Third Quarter 2025 Financial Results ROCK HILL, S.C., Oct. 30, 2025 (GLOBE NEWSWIRE) -- (NYSE:DDD) announced today it will release its financial results for the third quarter of 2025, ended September 30, 2025 after market close on Tuesday, November 4, 2025. The company will hold a conference call and webcast to discuss these financial results on Wednesday, November 5, 2025 at 8:30 a.m. Eastern Time. Third Quarter 2025 Financial Results Conference CallDate: Wednesday, November 5, 2025Time: 8:30 a.m. Eastern TimeListen via webcast: Participate via telephone: 2...
3D Systems Announces Major Milestones in Saudi Arabian Growth Initiati...
3D Systems Announces Major Milestones in Saudi Arabian Growth Initiative NAMI, the 3D Systems–Dussur joint venture, reached critical milestones in deploying advanced 3D printing across Saudi Arabia’s energy and defense sectorsSaudi Electric Company, the Middle East’s largest electricity producer, signed an agreement to make a strategic investment in NAMI, acquiring 30% stake in expanded joint ventureLockheed Martin entered into collaboration with NAMI to qualify and manufacture critical military and aerospace components in Saudi Arabia for use in international marketsNAMI awarded 5-year $26...
3D Systems Elevates the Art of Jewelry Making with Introduction of MJP...
3D Systems Elevates the Art of Jewelry Making with Introduction of MJP 300W Plus New Surface Enhance™ feature improves surface finishes to reduce polishing time and gold lossNew MultiJet Printing solution delivers over 30% improvements in speed with 50% less support material usage to reduce costsPost-processing time reduced by up to 60% with break-away supports, accelerating time to final jewelry itemNew cybersecurity features safeguard intellectual property, product quality, and business operations$1 billion 3D-printed precious metal jewelry market expected to grow to $3 billion by 2030 R...
3D Systems Provides Update on Software Strategy
3D Systems Provides Update on Software Strategy Primary focus on leveraging breakthroughs in AI to improve part quality, speed the design process for additive manufacturing, optimize manufacturing workflows and enhance ease-of-use in factory operating environments. Company to expand capabilities of 3D Sprint® for polymer production systems by leveraging AI and machine learning models, informed by data from industry’s largest installed base of production printers.Hubb Global Holdings to assume leadership for industrywide, printer-agnostic software platforms through acquisition of Oqton® Manu...
3D Systems Receives $7.65 Million Contract Award from U.S. Air Force f...
3D Systems Receives $7.65 Million Contract Award from U.S. Air Force for Advanced Metal Printing System Two-year contract award for Large-format Metal 3D Printer Advanced Technology DemonstratorSupports development of large-scale industrial metal AM print capabilities for high-speed flight applicationsAward is an extension of an existing program to demonstrate key technologies needed for 3D printing large, high-temperature metal structures associated with high-speed flight operating environments ROCK HILL, S.C., Aug. 26, 2025 (GLOBE NEWSWIRE) -- Today, (NYSE: DDD), a leading U.S.-based ...
3D Systems Announces Chief Financial Officer Transition
3D Systems Announces Chief Financial Officer Transition 3D Systems’ Executive Vice President, Phyllis Nordstrom to Serve as Interim Chief Financial Officer ROCK HILL, S.C., Aug. 20, 2025 (GLOBE NEWSWIRE) -- Today, (NYSE: DDD) announced that Jeffrey D. Creech is stepping down as the company’s Chief Financial Officer, effective August 29, 2025, to accept a new career opportunity. Phyllis Nordstrom, 3D Systems’ Executive Vice President, Chief Administrative Officer, has been appointed Interim CFO, effective August 29, 2025. “I want to thank Jeff for his dedication and leadership as we hav...
3D Systems Reports Second Quarter 2025 Financial Results
3D Systems Reports Second Quarter 2025 Financial Results ROCK HILL, S.C., Aug. 11, 2025 (GLOBE NEWSWIRE) -- (NYSE:DDD) announced today its financial results for the second quarter ended June 30, 2025. Revenue of $95 million led by double-digit growth in Medical Technology and Aerospace & Defense marketsRegenerative Medicine partnership with United Therapeutics targeted on manufacture of human lungs reached a new printing milestone resulting in a $2 million award in the quarterCost reduction and efficiency programs resulted in over $20 million of savings in operating expenses in Q2Compan...
3D Systems Announces Date of Second Quarter 2025 Financial Results
3D Systems Announces Date of Second Quarter 2025 Financial Results ROCK HILL, S.C., Aug. 04, 2025 (GLOBE NEWSWIRE) -- (NYSE:DDD) announced today it will release its financial results for the second quarter 2025 after the U.S. stock markets close on Monday, August 11, 2025. The company will hold a conference call and simultaneous webcast to discuss these financial results on Tuesday, August 12, 2025 at 8:30 a.m. Eastern Time. Second Quarter 2025 Financial Results Conference Call Date: Tuesday, August 12, 2025 Time: 8:30 a.m. Eastern Time Listen via webcast: Participate via telephon...
3D Systems Announces Major Milestone in Digital Dentistry with Full Co...
3D Systems Announces Major Milestone in Digital Dentistry with Full Commercial Release of New FDA-cleared Denture Solution Company’s technology redefines dental prosthetics with revolutionary single-piece, multi-material dentures delivering distinctive combination of exquisite aesthetics, comfort and outstanding resistance to breakage for enhanced patient experienceNextDent® Jetted Denture Solution validated with strong endorsements from beta customers highlighting effortless usability, unmatched material properties and ground-breaking efficiency improvements of up to 300%Commercial availab...
Unfortunately, this report is not available for the investor type or country you selected.
Report is subscription only.
Thank you, your report is ready.
Thank you, your report is ready.