reports
Enerpac Tool Group Reports Fourth Quarter 2020 Results
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group Corp. (NYSE: EPAC) (the “Company”), today announced results for its fiscal 2020 fourth quarter ended August 31, 2020. “Based on our sequential improvements from the third to fourth quarter, we believe our business is beginning to see signs of recovery from the ongoing COVID-19 global pandemic. Our team was able to drive increased commercial activity, which resulted in quarter-over-quarter improvement, and our cost control actions resulted in solid decremental margins as we wrapped up fiscal 2020. During the quarter we remained focused on our top...
Enerpac Tool Group Schedules Fourth Quarter 2020 Earnings Conference C...
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group Corp. (NYSE: EPAC) will announce its fiscal 2020 fourth quarter results on Wednesday, September 30, 2020. A news release outlining the financial results will be distributed before the market opens on Wednesday, September 30, 2020. Management will conduct a conference call beginning at 10:00 a.m. CT / 11:00 a.m. ET to discuss the results and respond to questions. The call can be accessed live through the company’s website at under the investor relations section. Additionally, a slide presentation, which will accompany the call, will also be on ...
Enerpac Tool Group Announces Dividend
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group Corp. (NYSE: EPAC) announced today that its Board of Directors has declared a cash dividend. The annual dividend of $0.04 per common share will be payable on October 19, 2020 to shareholders of record at the close of business on October 2, 2020. About Enerpac Tool Group Enerpac Tool Group is a premier industrial tools and services company serving a broad and diverse set of customers in more than 90 countries. The Company’s businesses are global leaders in high pressure hydraulic tools, controlled force products and solutions for precise posit...
Enerpac Tool Group Reports Third Quarter 2020 Results
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group Corp. (NYSE: EPAC) (the “Company”), today announced results for its fiscal 2020 third quarter ended May 31, 2020. “The challenging and unprecedented macroeconomic environment caused by the COVID-19 pandemic significantly impacted our third quarter results. Consistent with sharp declines in order rates reported by other industrial companies in April, we saw order rate declines of 30-40% starting in late March through May. However, we remained focused on keeping our employees safe, serving our customers and preserving our ability to execute our s...
Enerpac Tool Group Schedules Third Quarter 2020 Earnings Conference Ca...
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group Corp. (NYSE: EPAC) will announce its fiscal 2020 third quarter results on Thursday, June 25, 2020. A news release outlining the financial results will be distributed before the market opens on Thursday, June 25, 2020. Management will conduct a conference call beginning at 10:00 a.m. CT / 11:00 a.m. ET to discuss the results and respond to questions. The call can be accessed live through the company’s website at under the investor relations section. Additionally, a slide presentation, which will accompany the call, will also be on the website a...
Enerpac Tool Group Announces Early, Voluntary Redemption of Its Outsta...
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group Corp. (NYSE:EPAC) today announced it is providing notice to bond holders calling for redemption of all its outstanding 5.625% Senior Notes due 2022 (CUSIP: 00508XAF1; ISIN: US00508XAF15) (the “Notes”) in accordance with the Indenture dated April 16, 2012 (as amended and supplemented, the “Indenture”) governing the Notes. The aggregate outstanding principal amount of the Notes is $287,559,000. This voluntary, early redemption of the Notes will occur on June 15, 2020 (“Redemption Date”) at a redemption price equal to 100% (expressed as a percentage...
Enerpac Tool Group Provides COVID-19 Update
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group Corp. (NYSE:EPAC) today provided an update on the actions it is taking as the Company manages through the COVID-19 pandemic. “The COVID-19 crisis and oil price shock has created unprecedented challenges for businesses around the world including ours, our distributors’ and our customers’. The impact of the pandemic is now being reflected in lower global order rates for our business and is creating additional uncertainty about future demand. As a result, we are implementing proactive cost measures to keep pace with volatile market conditions, pre...
Enerpac Tool Group Reports Second Quarter 2020 Results
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group Corp. (NYSE: EPAC) (the “Company”), today announced results for its fiscal 2020 second quarter ended February 29, 2020. “Despite global economic uncertainty along with the early impact of the coronavirus that affected our China results for the second quarter, we continued to execute on our strategic initiatives. We are pleased to have completed the acquisition of HTL Group in the quarter, which is the UK’s leading provider of controlled bolting products. This transaction expands our portfolio of bolting products as well as our global rental off...
Enerpac Tool Group Schedules Second Quarter 2020 Earnings Conference C...
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group (NYSE: EPAC) will announce its fiscal 2020 second quarter results on Thursday, March 19, 2020. A news release outlining the financial results will be distributed before the market opens on Thursday, March 19, 2020. Management will conduct a conference call beginning at 10:00 a.m. CT / 11:00 a.m. ET to discuss the results and respond to questions. The call can be accessed live through the company’s website at under the investor relations section. Additionally, a slide presentation, which will accompany the call, will also be on the website and ...
Enerpac Tool Group Name Change Is Approved by Shareholders
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group (NYSE:EPAC) announced today that its shareholders approved an amendment to the company’s Restated Articles of Incorporation to change the corporation’s name from Actuant Corporation to Enerpac Tool Group Corp. In recognition of the change, members of the Enerpac Tool Group management team will ring the New York Stock Exchange closing bell on February 19th. The ceremony will be available on the Company’s website at . Randy Baker, the Company’s President and Chief Executive Officer, commented, “Last September we rebranded our business to reflect ...
Enerpac Tool Group Acquires HTL Group
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group (NYSE:EPAC) announces that it has acquired HTL Group, based in Cramlington, England. With fiscal 2019 revenue of approximately $17 million, HTL Group is the UK’s leading provider of controlled bolting products. HTL’s capabilities also include a strong rental business as well as calibration and repair and training services. The acquisition of HTL is aligned with Enerpac Tool Group’s strategy of becoming a pure-play Tools and Services company and expands its portfolio of bolting products as well as its global rental offering. About Enerpac Tool ...
Enerpac Tool Group Reports First Quarter 2020 Results
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group, which is the doing business name of Actuant Corporation (NYSE: EPAC) (the “Company”), today announced results for its fiscal 2020 first quarter ended November 30, 2019. “We had a solid start to fiscal 2020 and are pleased to deliver first quarter results consistent with our expectations, as we continue navigating a challenging economic environment. While demand was softer in the Americas, we saw stabilization in Europe along with continued growth in Middle East service and our Cortland business, demonstrating that our initiatives around comm...
Thanks to a better fundamental star rating, ACTUANT CORP. sees an upgr...
The independent financial analyst theScreener just awarded an improved star rating to ACTUANT CORP. (US), active in the Diversified Industrials industry. As regards its fundamental valuation, the title receives an improved star rating and now shows 4 out of 4 possible stars. With regard to its market behaviour, it remains unchanged and can be qualified as risky. theScreener considers that these elements allow slightly upgrading its rating to Neutral. As of the analysis date December 17, 2019, th...
Enerpac Tool Group Schedules First Quarter 2020 Earnings Conference Ca...
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group (NYSE: EPAC) will announce its fiscal 2020 first quarter results on Thursday, December 19, 2019. A news release outlining the financial results will be distributed before the market opens on Thursday, December 19, 2019. Management will conduct a conference call beginning at 10:00 a.m. CT / 11:00 a.m. ET to discuss the results and respond to questions. The call can be accessed live through the company’s website at under the investor relations section. Additionally, a slide presentation, which will accompany the call, will also be on the website...
Enerpac Tool Group Provides Update on Long-Term Strategy and Multi-Yea...
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group (NYSE: EPAC) today hosted an investor day where the Company provided updates on the strategic direction, growth prospects and value-creation opportunities of Enerpac as a pure-play industrial tools and services company. At the investor day, the Company discussed how it is positioned to drive best-in-class returns by leveraging its sustainable business model, disciplined capital deployment plans and experienced leadership team. “Enerpac is moving forward as a premier pure-play industrial tools and services company, serving a broad range of end m...
Enerpac Tool Group Elects Judy Altmaier as New Director
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group (NYSE:EPAC) announced today that the Board of Directors has elected Judy Altmaier to its Board effective today. Ms. Altmaier is a former executive of Toro Company, holding roles as President of Exmark Manufacturing a position she held from June 2013 to January 2019, along with Vice President of Operations and Quality Management from October 2009 to June 2013. Ms. Altmaier is an experienced executive with more than 30 years of international experience across a diverse set of industries with a focus on operations. Prior to Toro Company, Ms. Altmaie...
Enerpac Tool Group Becomes Premier Pure Play Industrial Tools and Serv...
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group (NYSE: EPAC) announced today that the Company is now a premier pure play industrial tools & services company following the completed sale of the Engineered Components & Systems (“EC&S”) segment to an affiliate of One Rock Capital Partners, LLC (“One Rock”). Enerpac Tool Group is a global leader in high pressure hydraulic tools, controlled force products and solutions for precise positioning of heavy loads. The Company is well-positioned for future growth and has a sustainable business model with well-recognized brands, robust global distributio...
Moody's announces completion of a periodic review of ratings of Actuan...
Announcement of Periodic Review: Moody's announces completion of a periodic review of ratings of Actuant Corporation. Global Credit Research- 29 Oct 2019. New York, October 29, 2019-- Moody's Investors Service has completed a periodic review of the ratings of Actuant Corporation and other ratings that are associated with the same analytical unit.
Enerpac Tool Group to Host Investor Day on November 14, 2019
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group (NYSE: EPAC) will hold its investor day on Thursday, November 14, 2019 at the Grand Hyatt New York at Grand Central Station – Manhattan Ballroom. Members of Enerpac Tool Group’s executive leadership team will host a series of presentations including the company overview, strategy and long-term targets beginning at 10:00am Eastern time. Registration is required to attend the event. To register to attend, please complete the online form by November 1, at . Interested parties may access a live webcast and replay of the event via the Enerpac To...
Enerpac Tool Group Announces Executive Leadership Change
MILWAUKEE--(BUSINESS WIRE)-- Enerpac Tool Group (NYSE:ATU) today announced that Barbara G. Bolens has been appointed Executive Vice President and Chief Strategy Officer. Ms. Bolens joined Enerpac Tool Group in August 2018 and since then has led strategy, investor relations and communication. “We are extremely pleased to announce Barb’s promotion. Her expertise, collaborative nature and personal passion exemplify the qualities that will help lead Enerpac Tool Group as we transform the company into a premium pure play industrial tools and services company. The new role elevates the development...
Unfortunately, this report is not available for the investor type or country you selected.
Report is subscription only.
Thank you, your report is ready.
Thank you, your report is ready.